TECHNICAL PERFORMANCES

PREVIOUS 1 - 2 - 3 NEXT

TECHNICAL PERFORMANCES		UNIT	YMS-200	YMS-350	YMS-600
CLAMPING UNIT	CLAMPING/FORCE	KN	1200	1600	2200
	PLATEN DIMENSIONS	mm	520 / 590	620 / 670	760 / 740
	DISTANCE BETWEEN TIE-BARS	mm	340 / 370	410 / 410	510 / 510
	MIN / MAX MOUID HEIGHT ADJUSTMENT	mm	80 / 350	80 / 450	120 / 550
	MAX OPENING STROKE	mm	320	410	510
	TIE-BARS DIAMETER	mm	60	75	100
	HYDRAULIC EJECTOR STROKE	mm	60	80	100
	HYDRAULIC EJECTOR FORCE	KN	31.00	38.50	50.30
	DRY CYDE (EUROMAP) (2)	1 / mm	25	24	20
INJECTION UNIT	SCREW DIAMETER	mm	40 / 45	50 / 55	60 / 65
	L/D RATIO	_	21 / 18	20 / 18	21 / 20
	THEORETICAL INJECTION CAPACITY	cm³	251 / 318	491 / 594	848 / 995
	INJECTION CAPACITY (POLISTYRENE)	gr	226 / 286	442 / 535	763 / 896
	MAX INJECTION PRESSURE	ton	1220 / 970	1023 / 846	1110 / 950
	PLASTICISING CAPACITY (3)	kg / h	90 / 110	125 / 150	130 / 160
	SCREW RPM	rpm	200	200	180
	SCREW TORQUE	kgm	60	95	115
POWER	TOTAL HEATING POWER	kw	6.0	10.5	12.0
	NO. OF ZONES	no	3 + 1	3 + 1	3 + 1
	ELECTRIC MOTOR	kw	11	15	18.5
	TOTAL INSTAILED POWER	kw	17	25.5	30.5
GENERAL SPECIFICATIONS	SYSTEM PRESSURE (MAX.)	bar	140	140	140
	TANK CAPACITY	Lt	240	360	440
	STD. MACHINE WEIGHT (APROX.)	kg	3500	6000	8000
	MACHINE DIMENSIONS	mm	5500 x 1000 x 1800	600 x 1200 x 2000	7500 x 1300 x 2000
	COOLING WATER REQUIREMENT 20^º C	m³ / h	1.2	1.4	2

NOT:

1 - PRESSURE IN MOULD: 250 BAR.

2 - DRY CYDE WITHOUT NOZZLE RETURN.

3 - THE SHOT WEIGHT, INJECTION RATE AND PLASTICISING CAPACITY VARY WITH MATERIAL AND MOLDING CONDITIONS.

4 - TECHNICAL SPECIFICATIONS HERE MENTIONED ARE INDICATIVE AND THEREFOIRE NOT BINDING FOR.

YONCA MAKİNA SAN. TİC. LTD. ŞTİ.

TERAZİDERE MAH. GÜNEŞ CAD. SEMA SOK. NO: 16 BAYRAMPAŞA

İSTANBUL / TURKEY

TEL: (+90 212 ) 577 15 18 - 674 45 31 - FAX: (+90 212 ) 613 89 59